SmartRebate Residential Application (PDF)

High-Efficiency Clothes Washer Up to $150 Rebate

High-Efficiency Clothes Washers (HEWs) utilize technological advances to deliver excellent wash performance while saving both water and energy. Resource efficient models use 35-50% less water and approximately 50% less energy. The water efficiency of clothes washers is rated using the term "water factor" to describe and compare its water use. Water factor is measured by the quantity of water (gallons) used to wash each cubic foot of laundry. A lower water factor represents greater water and energy efficiency. Qualifying Models must have a Water Factor (WF) of 6.0 or less.

SmartRebate Commercial Application (PDF)

High-Efficiency Clothes Washer Up to $400 Rebate

High-Efficiency Clothes Washers (HEWs) utilize technological advances to deliver excellent wash performance while saving both water and energy. Resource efficient models use 35-50% less water and approximately 50% less energy. The water efficiency of clothes washers is rated using the term "water factor" to describe and compare its water use. Water factor is measured by the quantity of water (gallons) used to wash each cubic foot of laundry. A lower water factor represents greater water and energy efficiency. Qualifying Models must have a Water Factor (WF) of 6.0 or less.

High Efficiency Toilet (Including Dual-Flush) Up to $100 Rebate

High-Efficiency Toilets (HETs) are defined as fixtures that flush at 20 percent below the 1.6-gallons-per-flush (gpf) U.S. maximum or less, equating to a maximum of 1.28-gpf.  (The HET category inlcudes dual-flush toilets).  The average water savings for HETs is estimated to be 38 gallons per day (gpd) when replacing a non-ULFT and 7 gpd when replacing a ULFT.

Note: Existing toilets must be 3.5 gallons per flush (gpf) or greater to qualify. A high efficiency toilet (1.28 gpf) replacing an existing Ultra Low Flow Toilet (ULFT) that uses 1.6 gpf does not qualify for a rebate.
- Qualifying HET Models 
- Multi-Unit Tracking Sheet

High-Efficiency Toilet (Including Dual-Flush) Up to $200 Rebate

High-Efficiency Toilets (HETs) are defined as fixtures that flush at 20 percent below the 1.6-gallons-per-flush (gpf) U.S. maximum or less, equating to a maximum of 1.28-gpf. (The HET category includes dual-flush toilets.) The average water savings for HETs is estimated to be 38 gallons per day (gpd) when replacing a non-ULFT and 7 gpd when replacing a ULFT.

High-Efficiency Urinal Up to $300 Rebate

High-Efficiency Urinals (HEUs) are defined as fixtures that function at 0.5-gpf or less. (The HEU category includes non-water urinals) Based on data from studies of actual usage, these urinals save 20,000 gallons of water per year with an estimated 20-year life. In addition to saving water and sewer cost, non-water urinals are an improvement over traditional urinals in both maintenance and hygiene.
  - Qualifying Models
  - Multi-Unit Tracking Sheet  

X-Ray Film Processor Re-Circulation System Up to $2,000 Rebate

The amount of water required to operate a non-digital x-ray film processor can be reduced by 98%! In one year, a typical film processing system needlessly sends hundreds of thousands of gallons of water down the drain. The average processor uses 788,400 gallons of water per year. With this re-circulation system, you can reduce wash-water effluent to 13,530 gallons per year, which lowers water and sewage costs. Municipal water supplies can be shut down by disasters such as earth-quakes, storms and droughts; with 15 gallons of bottled water and a power source, the processor can process films during a loss of water in an emergency.
  - Qualifying Models  
  - Multi-Unit Tracking Sheet